16:1 Baluns/Ununs

442300382 - 16:1 Baluns/Ununs
+3

FSB31-3/16, ID=3/16", RFI Range 1-300 MHz - Single Piece USB, Mouse, Keyboard, Audio cable size

FSB31-3/16-1
$2.65
In stock
1
Product Details
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: .25/6.3
OD (A) - in/mm: .788/20
ID (B) - in/mm: .26/6.6
Length (C) - in/mm: 1.55/39.4
Z (ohms per bead - single turn 1 MHz): 28
Z (ohms per bead - single turn 5 MHz): 83
Z (ohms per bead - single turn 10 MHz): 105
Z (ohms per bead - single turn 25 MHz): 180
Z (ohms per bead - single turn 100 MHz): 310
Z ohms (per bead - single turn 250 MHz): 240

Ferrite Snap On, ID = .1875 in, Mix 31

Excellent for RFI/Noise reduction for AV cable, Coaxial Audio, Audio Power Line, IP Serial Port Camera, Computer USB, etc.,

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.