16:1 Baluns/Ununs

442283848 - 16:1 Baluns/Ununs
+3

FB68-43 - .375" ID, RFI Range RFI Freq: 25-250 MHz, Unun/Balun Range: 1-200 MHz

FB68-43-1
$0.89
In stock
1
Product Details
Initial Permeability (@ 10KHz): 800
Material: NiZn
Max cable size - in/mm: .375
OD (A) - in/mm: .687/17.45
ID (B) - in/mm: .375/9.5
Length (C) - in/mm: .5/12.7mm
Z (ohms per bead - single turn 10 MHz): 40
Z (ohms per bead - single turn 25 MHz): 58
Z (ohms per bead - single turn 100 MHz): 83
Z ohms (per bead - single turn 250 MHz): 100
Case/Box lot size: 679

Ferrite Slip On Bead, ID = .375in/9.5mm, OD = .687/17.45mm, height = .5/12.7mm, Mix 43 - excellent for small inductors using Mix 43 material or inductive compensation on outputs of baluns or ununs.or RFI suppression from 25-250 MHz

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.