16:1 Baluns/Ununs

3434492443 - 16:1 Baluns/Ununs
+3

DSL/Cable Modem/Router/Ethernet/Internet RFI Kit - 3 Filters

RFI-ROUTER-4
$19.95
In stock
1
Product Details
MPN: RFI-ROUTER
Type: New
Country/Region of Manufacture: United States
Filter Power Rating (PEP watts): n/a
RFI Suppression Range (MHz): 1-300 MHz
# Ferrite Filters: 3 or 5 depending on model
Enclosure Size (inches): n/a
Typical Use:: 1-2 turns on all I/O cables

Use for DSL/cable modems, routers, access points, repeaters, Ethernet switches, etc.

The RFI-ROUTER-4 kit is meant to be used with a DSL Modem/Router with incoming DSL signal, up to 4 Ethernet lines and a single power DC power supply line coming into the device.Included are one snap on ferrite (3/4” hole) and two (3/4” hole) snap on split ferrite beads for the Ethernet outputs (2 per snap on using multiple turns for each cable). The additional 3/4" snap on is for the power supply line. The RFI-ROUTER-8 kit is identical but has 2 additional ferrite snap on for up to 4 additional ports,

Useful for all brands of computer equipment.
Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.