16:1 Baluns/Ununs

3434555668 - 16:1 Baluns/Ununs
+3

Automotive Battery Charger RFI Kit - - 1-300 MHz RFI Suppression

RFI-CHARGER
$39.95
In stock
1
Product Details

This kit suppresses EMI and RFI generated from DC battery charger such as used on automotive batteries uo to 100 amps output.

Simple snap on the ferrite suppressors (1" hole size) onto the AC input using multiple turns through the center and do the same for the DC output cables. The more turns through the center the hiogher the RFI suppression.

Simple - Effective and Low Cost solution.to suppress charger noise fed back into AC power lines acting as RFI transmitting antennas!

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.