12:1 Baluns/Ununs

442300386 - 12:1 Baluns/Ununs
+3

Ferrite Snap On Combo Pack, Mix 31,61,75 ID=1/2"/12.7mm, RFI Range 150 KHz-2000 MHz, 10 Filters

FSCP-316175-1/2-10
$69.95
In stock
1
Product Details
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: .5/12.7
OD (A) - in/mm: 1.22/31
ID (B) - in/mm: .514/13.1
Length (C) - in/mm: 1.55/5
Z (ohms per bead - single turn 1 MHz): 25
Z (ohms per bead - single turn 5 MHz): 71
Z (ohms per bead - single turn 10 MHz): 100
Z (ohms per bead - single turn 25 MHz): 156
Z (ohms per bead - single turn 100 MHz): 260
Z ohms (per bead - single turn 250 MHz): 260

Now you can get a ferrite snap on combo pack of 10 RFI filters in our most popular 1/2" size with all three filter ranges (great if you don't know the interfering frequency and need to cover the entire range when troubleshooting an RFI problem).

Mix 75 covers 150 KHz to 10 MHz (3 filters)

Mix 31 covers 1-300 MHz (usable to 500 MHz) (4 filters)

Mix 61 covers 200-2000 MHz (3 filters)

Use multiple turns for best results. (2 turns - 4 times a single turn, 3 turns = 9 times a single turn, etc.)

Save this product for later
Display prices in: USD
12:1 Baluns are useful between 600-650 ohm balanced loads the impedance at the  end of the feed line is 600 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

12:1 Ununs are useful between coax and long wires with a load impedance near 600 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 12:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.