12:1 Baluns/Ununs

442300435 - 12:1 Baluns/Ununs
+3

FSB75-1/2, ID=1/2", RFI Range 150Khz-10 MHz

FSB75-1/2-1
$12.95
In stock
1
Product Details
Country/Region of Manufacture: USA
Initial Permeability (@ 10KHz): 5000
Material: MnZn
Max cable size - in/mm: .5/12.7
OD (A) - in/mm: 1.14/29
ID (B) - in/mm: .514/13.1
Length (C) - in/mm: 1.14/29
Z (ohms per bead - single turn 200 KHz): 20
Z (ohms per bead - single turn 500 KHz): 58
Z (ohms per bead - single turn 1 MHz): 102
Z (ohms per bead - single turn 2 MHz): 70
Z (ohms per bead - single turn 5 MHz): 50

Ferrite Snap On, ID = .514in/13.1 mm, Mix 75

Excellent for AC/DC power cables on switching power supplies and data/audio/video cables for AM broadcast RFI suppression.

Save this product for later
Display prices in: USD
12:1 Baluns are useful between 600-650 ohm balanced loads the impedance at the  end of the feed line is 600 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

12:1 Ununs are useful between coax and long wires with a load impedance near 600 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 12:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.