DELUXE Desktop Computer RFI Kit - for 3 AC Powered devices and interconnect wires
Deluxe Desktop Computer RFI Kit for- 1 Ring Filter for computer AC power + 6 Snap On filters for interconnect cables plus 2 additional AC power Ring filter and 2 snap on filters for interconnect cables of peripherals such as printers, AC powered speakers, etc. The filters are selected to eliminate RFI from 1 to 300 MHz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.
Deluxe filter set for eliminating noise and RFI due to routers, wall wart power supplies, CB, AM broadcast and ham radio interference, etc.
Installation is easy. AC power cord through ring filter multiple times and snap on filters on I/O cables nearest computer - problem cured!
We specify impedance ratios as an output to input ratio where the output (or load) is given first and the input is given second (e.g. 100:50 (2:1) would mean a 100 ohm output and a 50 ohm input; a 25:50 (1:2) would mean a 25 ohm load and a 50 ohm input). Most all products use a 50 ohm input unless otherwise specified.
We have products that are available as kits for the do-it-yourself (DIY) person or fully assembled and tested units for the “Plug & Play” crowd.
Our impedance transformers are available using two different topologies: Binocular cores or toroid cores with multiple turns for increased effectiveness and wide band frequency transformations. We utilize single and multiple core transformers using high order windings when needed to extend product performance.
We rate the power ratings as watts PEP (Peak Envelop Power) with standard duty cycles for various modes. To determine the PEP rating required for your needs, see: Choke & Transformer Power Ratings
This website page serves as a link page to the frequency ranges of our impedance transformers configured as either baluns or ununs. You can click on a picture to go to the specific page about the products described in the picture.