Includes protective heat shrink
1/4″/6.4mm max Cable Size Chokes
For use with RG-58, RG-6, RG-59, LM-240 and similar size cables – all cable impedances, 160-6 meters. Choke diameter 0.6 inch. Requires 9-1/2 inches of cable for installation of SLO-1/4.Choose SLO-1/4 (5 beads) or for extended choking, choose SLO-1/4-10 (10 beads) or for super extended choking choose SLO-1/4-15 (15 beads).Use SLO-1/4 on RG-6 to stop RFI on cable/satellite systems.
Select chokes with minimum of 500 ohms at your frequency of interest for best results or upgrade to our CUBE(TM), or Super Choker(TM) or Maxi-Choker(TM) chokes up to 10,000 ohms choking
Use on RG-6 coax to stop RFI on cable/satellite systems.
Select 10 bead version for 160 meter use, 15 bead version for even higher choking power.
Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.
This product was previously named BA-58
4:1 impedance transformers (Baluns and Unun configurations) are available in kit form or assembled form in a weatherproof Current Unun and Balun Enclosure which we call CUBE Baluns™ and CUBE Ununs™. All 4:1 impedance transformers use ferrite cores and the kit forms can be configured as a balun with balanced output of 200 ohms or as ununs with one side grounded.
4:1 baluns are designed for 50 ohm unbalanced (coax) input to 200 ohm output (either balanced or with one side grounded).
4:1 Baluns are useful between balanced lines for center fed Zepps, Off-center fed (OCF) dipoles with coax, G5RV antennas, full wave loops, NVIS dipoles that are close to ground and have impedance levels near 200 ohms or high impedance feeds for log periodic beams.
4:1 ununs are useful between coax and vertical antennas, monopole verticals or long wires with load impedances near 200 ohms.