Available as a Unun for 50 ohm coax to 75 ohm coax or 75 unbalanced load or as a Balun for 50 ohm coax to balanced load such as a low (less than a wavelength high) dipole with either side eye bolts and halyard hoist or as post mountable top studs output.
This is an impedance transformer for 50 to 75 ohms and may require a additional feed line choke to keep common mode current off the coax braid.
CB-1.5-1500EB is useful for a dipole center feedpoint for low dipoles with 75 ohm antenna impedance.
Top stud version also useful for 75 ohm ladder line to coax interface
4:1 impedance transformers (Baluns and Unun configurations) are available in kit form or assembled form in a weatherproof Current Unun and Balun Enclosure which we call CUBE Baluns™ and CUBE Ununs™. All 4:1 impedance transformers use ferrite cores and the kit forms can be configured as a balun with balanced output of 200 ohms or as ununs with one side grounded.
4:1 baluns are designed for 50 ohm unbalanced (coax) input to 200 ohm output (either balanced or with one side grounded).
4:1 Baluns are useful between balanced lines for center fed Zepps, Off-center fed (OCF) dipoles with coax, G5RV antennas, full wave loops, NVIS dipoles that are close to ground and have impedance levels near 200 ohms or high impedance feeds for log periodic beams.
4:1 ununs are useful between coax and vertical antennas, monopole verticals or long wires with load impedances near 200 ohms.