Antenna Products

50:450 ohm (9:1) Balun or Unun Core Kit, 1.8-30 MHz, 250 watts PEP, end fed, T2FD antenna

SKU BA-9-250
In stock
Product Details

Model BA-9-250 is a 9:1 balun/unun kit used to translate a 50 ohm input up to 450 ohms at RF power levels up to 250 watts PEP when used with a matched load. With a matched 450 ohm load the SWR over the frequency range 1.8 to 30 MHz is shown in the following table measured with an AIM 4170 network analyzer. Notice that the conversion from 450 to 50 ohms is very consistent from 1-31 MHz and SWR is less than 2:1 over most of the range allowing easy tuning by most radio internal antenna tuners or an external tuner. Graph is for a 9:1 unun often used with long wire or end fed antennas.

Radio Club idea:

Buy 10 for a club do it yourself construction project - you can learnsomething and also build an end fed antenna (just add wire).

Typical SWR curve for this project:

BA 9 250 Graph 1024x614 - Antenna Products

Save this product for later
Palomar antenna products include feed line chokes, feed line to antenna matching transformers, static bleeders and other accessories. Click on the link to connect to the product you need.