HF High Power Impedance Transformers

MAXI-CHOKER Coax Line Isolator/Balun, 1-61 MHz, 1.5/3KW, SO-239 In/Stud Output, FLAGPOLE OCF, G5RV, ZS6BKW, BN4000 Replacement, Ladder Line-Coax interface

SKU MC-1-1500LL
$89.95
PEP Power
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
MAXI-CHOKER Coax Line Isolator/Balun, 1-61 MHz, 1.5/3KW, SO-239 In/Stud Output, FLAGPOLE OCF, G5RV, ZS6BKW, BN4000 Replacement, Ladder Line-Coax interface
Product Details
Brand: Palomar Engineers
MPN: MC-1-1500LL or MC-1-3000LL
Country/Region of Manufacture: United States
Effective Frequency Range (MHz): 1-161
PEP Power Rating (watts): 1500 or 3000 to 61 MHz, 500 watts to 161 Mhz
Choking Impedance Range (ohms): 500-6000 (1-61 Mhz)
Common Mode Attenuation (db): 20-35db
Estimated Insertion Loss (db): .25 db
Input Connector Type: SO-239 female
Output Connector Connector Type: Top Studs
Ground Connector (Y/N): optional
Enclosure Size (LxWxH inches): 8 or 12" long, 2.5 in diameter

MAXI-CHOKER Features:

- Uses proprietary Multi-Mix(TM) technology for maximum choking (up to 5K ohm) and maximum bandwidth

- 1.5 KW or 3 KW PEP Option, 50 ohm SO-239 connectors In dual screw terminal output for ladder line or dipole driven element, etc. effective 1-61 MHz

- Up to -48dB common mode suppression solves tough RFI issues

- Works for all coax fed antennas from 1.8-61 MHz (160-6 meters) - excellent for multi-band beams, verticals, dipoles, off center fed antennas, tri-band beams.

- 2-5 times more choking resistance, wider bandwidth and higher power then competing filters

- great replacement choke for G5RV/ZS6BKW antennas or as a 1:1 ladder line to coax interface for Flagpole OCF type antennas with high common mode choking to isolate the coax braid from becoming part of the antenna.

- Available with ground lug/internal static bleeder option

- Excellent replacement for Hygain BN4000D balun used on beam antennas


MAXI-CHOKER feed line chokes are used to suppress common mode current carried on the outside of the coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point or at a ladder line to coax junction, like a G5RV antenna.

Note: Color may be white or black depending on on inventory at time of order. Also available with SO-239 in/Out (MC-1-1500 or MC-1-3000) or with static bleeder/ground (MC-1-1500GB or MC-1-3000GB).





The high power ferrite impedance transformer series (> 1:1), configured with outputs to act as a baluns (unbalanced coax in to balanced load output) or as ununs (unbalanced coax input to unbalanced load output) are designed for demanding radio transmitter stations that run over 1,000 watts PEP or run continuous modes like AM, digital, RTTY, FM, etc. at high power levels. Radio contest operators, commercial shortwave broadcast, and industrial and commercial stations use these transformers for for a variety of balanced and unbalanced antenna loads.  Baluns are typically used for balanced loads and antennas like dipoles, loops, log periodics, and direct feed yagi/beams.  Ununs are used  with verticals, end fed wires, horizontal dipoles, G5RV/ZS6BKW, Zepps, vertical wire beams, etc).  All products are in an enclosed NEMA water resistant box with SO-239 input connector and stainless steel side/top studs with wing nuts or side and top eyebolts.  The enclosure box has mounting “side feet” for attachment to a post or antenna boom using nylon ties.