Model CB-6-1500 is a 6:1 (300:50) voltage balun housed in a Nema enclosure box (4″ x 4″ x 2″) with two top studs capable of input power levels up to 1.5KW PEP/500 watts continuous when used with a matched load. The 6:1 ratio takes 50 ohms input and matches to 300 ohms balanced output from 1.8-61 MHz with SWR < 1.5:1 under matched load conditions. A great balun for windoms, OCF antennas >60 feet over ground, Hertz and folded dipole antennas, T2FD etc. Dual core, Ruthroff style balun. Choose version with side eye bolts for wire attachments for OCF dipole use.
Snap On Sleeve Chokes
Connector already on the cable? Don’t want to remove it? Use Snap On Ferrite split bead kits that clamp over the cable.
SNAP ON Sizes for Heliax and Coax Cable
Shown in the table are the SLIP ON and SNAP ON products for various popular Heliax and coax cables. These are the correct size for making common mode chokes for coaxial cable using either Snap On ferrite beads.

Refine by
Dual Band VHF UHF Antenna Feed line Choke - J-Pole, Verticals, Hand Held Beams, mobile antennas - Choose 1/4", 1/2", 3/4" cable size, 100-500 MHzDual Band VHF UHF Antenna Feed line Choke - J-Pole, Verticals, Hand Held Beams, mobile antennas - Choose 1/4", 1/2", 3/4" cable size, 100-500 MHzSKU SNO31-1/4-4UHFVHF$14.95On Sale
Snap On RF Choke - 1/4"/6mm cable, RG58/8X/LMR240, Heat Shrink OptionSnap On RF Choke - 1/4"/6mm cable, RG58/8X/LMR240, Heat Shrink OptionSKU SNO31-1/4-5WList price $24.95 Save 12%$21.95On Sale
Snap On RF Choke/Isolator - 1/2"/12.7mm cable -5/10/15 Bead Option, 3-300 MHzSnap On RF Choke/Isolator - 1/2"/12.7mm cable -5/10/15 Bead Option, 3-300 MHzSKU SNO31-1/2-5List price $29.95 Save 13%$25.95On Sale
Snap On RF Choke/Isolator - 3/8"/9mm cable, 5/10/15 Bead Option, 1-300 MHzSnap On RF Choke/Isolator - 3/8"/9mm cable, 5/10/15 Bead Option, 1-300 MHzSKU SNO31-3/8-5List price $18.75 Save 4%$17.95
Snap On Sleeve Chokes
Connector already on the cable? Don’t want to remove it? Use Snap On Ferrite split bead kits that clamp over the cable.
SNAP ON Sizes for Heliax and Coax Cable
Shown in the table are the SLIP ON and SNAP ON products for various popular Heliax and coax cables. These are the correct size for making common mode chokes for coaxial cable using either Snap On ferrite beads.



