Model CB-6-1500 is a 6:1 (300:50) voltage balun housed in a Nema enclosure box (4″ x 4″ x 2″) with two top studs capable of input power levels up to 1.5KW PEP/500 watts continuous when used with a matched load. The 6:1 ratio takes 50 ohms input and matches to 300 ohms balanced output from 1.8-61 MHz with SWR < 1.5:1 under matched load conditions. A great balun for windoms, OCF antennas >60 feet over ground, Hertz and folded dipole antennas, T2FD etc. Dual core, Ruthroff style balun. Choose version with side eye bolts for wire attachments for OCF dipole use.
Bullet EFLW Antenna Wire Kits (41, 71, 92, 111, 155, 173, 203, 268 feet) includes coated wire, insulator and connector lug - preassembled
SKU BWK-41$24.95Bullet Wire Length (FT)1Save this product for later Customer reviews Reviews only from verified customersNo reviews yet. You can buy this product and be the first to leave a review.Bullet EFLW Antenna Wire Kits (41, 71, 92, 111, 155, 173, 203, 268 feet) includes coated wire, insulator and connector lug - preassembledProduct DetailsBrand: Palomar Engineers, Inc.Country/Region of Manufacture: USABullet End Fed Long Wire (EFLW) Antenna Wire Kit for end fed long wire antennas - choose 41, 71, 111, 155, 173, 203, 268 foot lengths complete with end insulator, #14 Insulated stranded copper wire and spade lugs and heat shrink for lugs for attachment to an optional Bullet 9:1 unun.
Insulators are a very stealthy, strong, pair of 2 PVC, 2 1/4" long. 1" wide. 1 1/8" hole separation wire antenna insulators and may be black, gray or white depending upon inventory
See related products for 9:1 transformers from 100 watts to 5KW, 9:1 toroid kits, and feed line chokes.
For a complete installation you will need 9:1 unun, wire kit, appropriate length of coax, and feed line choke (SOFLC is easiest to use and change position as you tune the antenna).
Bullet Antenna Length - feet (41, 71, 92, 111, 155, 173)
Corresponding Counterpoise length feet (16, 42, 90, 37, 95, 80) - place feed line choke on coax at this measured length from 9:1 unun
TECHNICAL NOTE: If you are building your own End fed Long Wire antenna, don't forget the end fed coax choke (or equivalent counterpoise) which is required to make the antenna operate correctly! End fed coax choke part numbers are SOFLC, EFFLC-240
You May Also LikeOn Sale
50:450 ohm (9:1) CUBE™ Unun, 1.8-61 MHz, 1.5 KW, End Fed Long Wire50:450 ohm (9:1) CUBE™ Unun, 1.8-61 MHz, 1.5 KW, End Fed Long WireSKU CU-9-1500List price $129.95 Save 15%$109.95Display prices in:USD
Bullet EFLW Antenna Wire Kits (41, 71, 92, 111, 155, 173, 203, 268 feet) includes coated wire, insulator and connector lug - preassembled
Bullet End Fed Long Wire (EFLW) Antenna Wire Kit for end fed long wire antennas - choose 41, 71, 111, 155, 173, 203, 268 foot lengths complete with end insulator, #14 Insulated stranded copper wire and spade lugs and heat shrink for lugs for attachment to an optional Bullet 9:1 unun.
Insulators are a very stealthy, strong, pair of 2 PVC, 2 1/4" long. 1" wide. 1 1/8" hole separation wire antenna insulators and may be black, gray or white depending upon inventory
See related products for 9:1 transformers from 100 watts to 5KW, 9:1 toroid kits, and feed line chokes.
For a complete installation you will need 9:1 unun, wire kit, appropriate length of coax, and feed line choke (SOFLC is easiest to use and change position as you tune the antenna).
Bullet Antenna Length - feet (41, 71, 92, 111, 155, 173)
Corresponding Counterpoise length feet (16, 42, 90, 37, 95, 80) - place feed line choke on coax at this measured length from 9:1 unun
TECHNICAL NOTE: If you are building your own End fed Long Wire antenna, don't forget the end fed coax choke (or equivalent counterpoise) which is required to make the antenna operate correctly! End fed coax choke part numbers are SOFLC, EFFLC-240
