Model CB-6-1500 is a 6:1 (300:50) voltage balun housed in a Nema enclosure box (4″ x 4″ x 2″) with two top studs capable of input power levels up to 1.5KW PEP/500 watts continuous when used with a matched load. The 6:1 ratio takes 50 ohms input and matches to 300 ohms balanced output from 1.8-61 MHz with SWR < 1.5:1 under matched load conditions. A great balun for windoms, OCF antennas >60 feet over ground, Hertz and folded dipole antennas, T2FD etc. Dual core, Ruthroff style balun. Choose version with side eye bolts for wire attachments for OCF dipole use.
50:75 ohm (1.5:1) CUBE™ Balun/Unun, 1.8-61 MHz, 1.5KW PEP, DipoleProduct DetailsType: BALUN/UnunInput ohms/Output ohms: 50 in/75 outFrequency Range < 2:1 SWR (MHz): 1.8-61 MHzPEP Power Rating (watts): 1500Insertion Loss (dB): <.2Input Connector: SO-239 UHFOutput Connector(s): Top Studs/Side Eyebolts/So-239Transformer Topology: broadband binocular coreHardware Type: Stainless SteelEnclosure Size: 4" x 4" x 2"Weight (pounds): 2Available as a Unun for 50 ohm coax to 75 ohm coax or 75 unbalanced load or as a Balun for 50 ohm coax to balanced load such as a low (less than a wavelength high) dipole with either side eye bolts and halyard hoist or as post mountable top studs output.
This is an impedance transformer for 50 to 75 ohms and may require a additional feed line choke to keep common mode current off the coax braid.
CB-1.5-1500EB is useful for a dipole center feedpoint for low dipoles with 75 ohm antenna impedance.
Top stud version also useful for 75 ohm ladder line to coax interface
Available as a Unun for 50 ohm coax to 75 ohm coax or 75 unbalanced load or as a Balun for 50 ohm coax to balanced load such as a low (less than a wavelength high) dipole with either side eye bolts and halyard hoist or as post mountable top studs output.
This is an impedance transformer for 50 to 75 ohms and may require a additional feed line choke to keep common mode current off the coax braid.
CB-1.5-1500EB is useful for a dipole center feedpoint for low dipoles with 75 ohm antenna impedance.
Top stud version also useful for 75 ohm ladder line to coax interface
