Antenna Static Bleeders

Solar Junction Box Ferrite Filter - ID"1" 1-300 MHz Suppression

SKU RFI-PV-JB
$19.50
Bulk pricing available for quantities of 3 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
3 items$17.5010% off
25 items$17.0013% off
100 items$15.6020% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
Solar Junction Box Ferrite Filter - ID"1" 1-300 MHz Suppression
Product Details
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: 1.0/25.4
OD (A) - in/mm: 2.22/56.4
ID (B) - in/mm: 1.02/25.9
Length (C) - in/mm: 1.69/41.9
Z (ohms per bead - single turn 1 MHz): 45
Z (ohms per bead - single turn 5 MHz): 90
Z (ohms per bead - single turn 10 MHz): 125
Z (ohms per bead - single turn 25 MHz): 218
Z (ohms per bead - single turn 100 MHz): 375
Z ohms (per bead - single turn 250 MHz): 340

Solar Junction Box Ferrite Snap On Filter, ID = 1.02 in/25.9 mm, Mix 31

Also known as Big Clamp On. Very useful for AC/DC power, coax cable, etc.

Cable not included as shown in picture.

THE RFI KIT FILTERS ONLY SUPPRESS COMMON MODE CURRENT (SIGNALS) THAT ARE COMMON TO ALL WIRES IN THE CABLE, AND DOES NOT EFFECT INDIVIDUAL DIFFERENTIAL SIGNALS ON EACH WIRE. THE FILTERS HAVE NO EFFECT ON THE NORMAL SIGNALS CARRIED WITHIN THE CABLE.

Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications.  Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc.  You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.

A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common.  The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.

THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!

Solar Junction Box Ferrite Filter - ID"1" 1-300 MHz Suppression

SKU RFI-PV-JB
$19.50
Bulk pricing available for quantities of 3 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
3 items$17.5010% off
25 items$17.0013% off
100 items$15.6020% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
Solar Junction Box Ferrite Filter - ID"1" 1-300 MHz Suppression
Product Details
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: 1.0/25.4
OD (A) - in/mm: 2.22/56.4
ID (B) - in/mm: 1.02/25.9
Length (C) - in/mm: 1.69/41.9
Z (ohms per bead - single turn 1 MHz): 45
Z (ohms per bead - single turn 5 MHz): 90
Z (ohms per bead - single turn 10 MHz): 125
Z (ohms per bead - single turn 25 MHz): 218
Z (ohms per bead - single turn 100 MHz): 375
Z ohms (per bead - single turn 250 MHz): 340

Solar Junction Box Ferrite Snap On Filter, ID = 1.02 in/25.9 mm, Mix 31

Also known as Big Clamp On. Very useful for AC/DC power, coax cable, etc.

Cable not included as shown in picture.

THE RFI KIT FILTERS ONLY SUPPRESS COMMON MODE CURRENT (SIGNALS) THAT ARE COMMON TO ALL WIRES IN THE CABLE, AND DOES NOT EFFECT INDIVIDUAL DIFFERENTIAL SIGNALS ON EACH WIRE. THE FILTERS HAVE NO EFFECT ON THE NORMAL SIGNALS CARRIED WITHIN THE CABLE.