Simple Dipole Feed Line Choke for 1/4" coax (1.8-61 MHz)
The simplest, most cost effective feed line choke is a ferrite ring installed as shown in the picture (at the antenna feed point).
Improves antenna pattern by preventing your dipole from becoming a tripole
Prevents pesky coax braid radiation and RFI
for best results use multiple turns through center
Use one choke for each antenna feed line - take a 3 foot piece of G-8X (part# RG8X-3) and wrap 10-12 turns thru center for a good feed line choke.
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Simple Dipole Feed Line Choke for 1/4" coax (1.8-61 MHz)
The simplest, most cost effective feed line choke is a ferrite ring installed as shown in the picture (at the antenna feed point).
Improves antenna pattern by preventing your dipole from becoming a tripole
Prevents pesky coax braid radiation and RFI
for best results use multiple turns through center
Use one choke for each antenna feed line - take a 3 foot piece of G-8X (part# RG8X-3) and wrap 10-12 turns thru center for a good feed line choke.