All coax I/O and control lines and AC/DC power line for SPE-2K-FA amplifier with multiple RF inputs and outputs, control/keying/frequency I/O.
Included are the following chokes and installation guidelines to suppress RFI in and out:
RF Input (3x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center
RF Output (6x):Snap On Filter (1” ID) – 3 turns of coax cable through center
Relay Cable/ALC Cable (4x):Snap On Filter (1/2” ID) – multiple turns through center
CAT/USB (5x):Snap On Filter (1/2” ID)- multiple turns through filter for each ACC
AC Power:Snap On Filter (1” ID) – 3 turns of power cord through center
You get 1.4" ID Ring x 3, 1" ID snap on x 7, 1/2" ID snap on x 9 with each kit.
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
All coax I/O and control lines and AC/DC power line for SPE-2K-FA amplifier with multiple RF inputs and outputs, control/keying/frequency I/O.
Included are the following chokes and installation guidelines to suppress RFI in and out:
RF Input (3x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center
RF Output (6x):Snap On Filter (1” ID) – 3 turns of coax cable through center
Relay Cable/ALC Cable (4x):Snap On Filter (1/2” ID) – multiple turns through center
CAT/USB (5x):Snap On Filter (1/2” ID)- multiple turns through filter for each ACC
AC Power:Snap On Filter (1” ID) – 3 turns of power cord through center
You get 1.4" ID Ring x 3, 1" ID snap on x 7, 1/2" ID snap on x 9 with each kit.