This RFI kit was created to suppress RFI issues with your cable tv box interference. This kit was created out of necessity from a ham using high power antennas near the cable TV box. The use of the ferrite filters completely eliminated the RFI issue allowing the ham to enjoy the use of the cable TV system while using the ham radio system.
The ferrite filters are selected to suppress RFI from 1 to 300 MHz. The filters are easy to install, don’t require modification of the protected equipment and work in almost all cases. See product picture for suggested filter use.
What is included in the kit?
The RFI-CABLETV kit contains a snap on filter for the AC power cord, the HDMI/Video output cable and the and coax cable TV input cable.
You get three 1/2" ID snap on RFI filters and an installation manual.
You need 1 RFI-CABLETV RFI kit for each cable TV box afflicted with RFI.
For additional protection of the video monitor use the RFI-HDTV RFI kit which suppresses RFI coming into the AC power line into the HDTV.
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
This RFI kit was created to suppress RFI issues with your cable tv box interference. This kit was created out of necessity from a ham using high power antennas near the cable TV box. The use of the ferrite filters completely eliminated the RFI issue allowing the ham to enjoy the use of the cable TV system while using the ham radio system.
The ferrite filters are selected to suppress RFI from 1 to 300 MHz. The filters are easy to install, don’t require modification of the protected equipment and work in almost all cases. See product picture for suggested filter use.
What is included in the kit?
The RFI-CABLETV kit contains a snap on filter for the AC power cord, the HDMI/Video output cable and the and coax cable TV input cable.
You get three 1/2" ID snap on RFI filters and an installation manual.
You need 1 RFI-CABLETV RFI kit for each cable TV box afflicted with RFI.
For additional protection of the video monitor use the RFI-HDTV RFI kit which suppresses RFI coming into the AC power line into the HDTV.