This sub-woofer RFi kit is specifically designed to suppress audio interference triggered by Radio Frequency Interference problems from AM, FM, CB and Ham radio stations AND to minimize the interference to nearby electronics caused by a sub-woofer without magnetic shielding (Velodyne, Hartley, Hsu, etc). The ferrite filters are selected to suppress RFI from 1 to 300 MHz. The filters are easy to install, don’t require modification of the protected equipment and work in almost all cases.
What is included in the kit?
The RFI-HTS-SW kit contains a a ring filter for the AC power cord to the sub-woofer and 4 snap-on filters for the speaker wires (either for audio pass through to main speakers or direct line out to the sub-woofer).
Tech Note: This kit is INCLUDED in the full home theater RFI Kit (part #RFI-HTS) and you do not have to purchase a separate RFI kit for the sub-woofer.
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
This sub-woofer RFi kit is specifically designed to suppress audio interference triggered by Radio Frequency Interference problems from AM, FM, CB and Ham radio stations AND to minimize the interference to nearby electronics caused by a sub-woofer without magnetic shielding (Velodyne, Hartley, Hsu, etc). The ferrite filters are selected to suppress RFI from 1 to 300 MHz. The filters are easy to install, don’t require modification of the protected equipment and work in almost all cases.
What is included in the kit?
The RFI-HTS-SW kit contains a a ring filter for the AC power cord to the sub-woofer and 4 snap-on filters for the speaker wires (either for audio pass through to main speakers or direct line out to the sub-woofer).
Tech Note: This kit is INCLUDED in the full home theater RFI Kit (part #RFI-HTS) and you do not have to purchase a separate RFI kit for the sub-woofer.