Included are the following chokes and installation guidelines:
RF Input: F240 Ring – 5-9 turns of RG-58 size through center
RF Output: FSB-1 (Big Clamp on) – 3 turns of RG-8 size cable
Relay Cable: FSB-1/2 – multiple turns through choke – ½” diameter hole
DC Power Line: FSB-1 (Big Clamp On) – 3-6 turns through center
AC Power Line: FSB-1 (Big Clamp On) – 3-6 turns through center
This is a generic linear amplifier RFI kit for DC powered amplifiers. Works on many popular amplifiers
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Included are the following chokes and installation guidelines:
RF Input: F240 Ring – 5-9 turns of RG-58 size through center
RF Output: FSB-1 (Big Clamp on) – 3 turns of RG-8 size cable
Relay Cable: FSB-1/2 – multiple turns through choke – ½” diameter hole
DC Power Line: FSB-1 (Big Clamp On) – 3-6 turns through center
AC Power Line: FSB-1 (Big Clamp On) – 3-6 turns through center
This is a generic linear amplifier RFI kit for DC powered amplifiers. Works on many popular amplifiers