Fish Finder – Sonar RFI Kit
Fish Finders/Sonar units can cause RFI “noise” in other electronic devices on a boat including audio and video systems, radar, SSB, wind/speed/depth instruments, etc. Likewise other electronic devices can also interfere with the fish finder and cause erroneous depth/temperature readings.
Palomar Engineers has developed a simple to install fish finder/sonar RFI suppression kit to solve the RFI noise problem aboard recreational and commercial boats.
Just slip a split bead on the transducer cable (1" ID) and use the 5 1/2" ID split beads on the fish finder/sonar readout unit transducer input and DC cables. Use the extra ferrites on other equipment needing protection like the Radar, radio, etc.
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Fish Finder – Sonar RFI Kit
Fish Finders/Sonar units can cause RFI “noise” in other electronic devices on a boat including audio and video systems, radar, SSB, wind/speed/depth instruments, etc. Likewise other electronic devices can also interfere with the fish finder and cause erroneous depth/temperature readings.
Palomar Engineers has developed a simple to install fish finder/sonar RFI suppression kit to solve the RFI noise problem aboard recreational and commercial boats.
Just slip a split bead on the transducer cable (1" ID) and use the 5 1/2" ID split beads on the fish finder/sonar readout unit transducer input and DC cables. Use the extra ferrites on other equipment needing protection like the Radar, radio, etc.