Now you can get a ferrite snap on combo pack of 10 RFI filters in 1/4" size with all three filter ranges (great if you don't know the interfering frequency and need to cover the entire range when troubleshooting an RFI problem).
Mix 75 covers 150 KHz to 10 MHz (3 filters)
Mix 31 covers 1-300 MHz (usable to 500 MHz) (4 filters)
Mix 61 covers 200-2000 MHz (3 filters)
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Now you can get a ferrite snap on combo pack of 10 RFI filters in 1/4" size with all three filter ranges (great if you don't know the interfering frequency and need to cover the entire range when troubleshooting an RFI problem).
Mix 75 covers 150 KHz to 10 MHz (3 filters)
Mix 31 covers 1-300 MHz (usable to 500 MHz) (4 filters)
Mix 61 covers 200-2000 MHz (3 filters)