Palomar Engineers Fan Dipole kit for 80 and 40 meters. Choose 500, 1500 or 5000 watts PEP option. 135 feet wide for 80 meters and 66 feet wide for 40 meters. For best results install so end are 5 feet apart and as high as possible.
Dipole wire kits come assembled to selected balun - just add coax and raise with paracord and use our pulleys for ease of installation. Keep each dipole end approximately 36 inches minimum apart if possible. Adjust 80 meter length first and then 40 meter length as there will be some interaction with each other.
You can also add additional option dipole kits. Just add to cart in addition to this antenna. Be sure to space ends 3-5 feet away from the other dipoles. Tune the lowest frequency first, then next highest, etc.
If you want different band combinations, choose the dipole wire kits needed and then select the Bullet-1B-500, CB-1-150EB or CB-1-5000EB for 500/1500/5000 watts rating.
You can have more than 2 bands on a fan dipole, just select an additional band using our convenient Dipole Wire Kits!
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Palomar Engineers Fan Dipole kit for 80 and 40 meters. Choose 500, 1500 or 5000 watts PEP option. 135 feet wide for 80 meters and 66 feet wide for 40 meters. For best results install so end are 5 feet apart and as high as possible.
Dipole wire kits come assembled to selected balun - just add coax and raise with paracord and use our pulleys for ease of installation. Keep each dipole end approximately 36 inches minimum apart if possible. Adjust 80 meter length first and then 40 meter length as there will be some interaction with each other.
You can also add additional option dipole kits. Just add to cart in addition to this antenna. Be sure to space ends 3-5 feet away from the other dipoles. Tune the lowest frequency first, then next highest, etc.
If you want different band combinations, choose the dipole wire kits needed and then select the Bullet-1B-500, CB-1-150EB or CB-1-5000EB for 500/1500/5000 watts rating.
You can have more than 2 bands on a fan dipole, just select an additional band using our convenient Dipole Wire Kits!