FSB31-3/8, ID=3/8", RFI Range 1-300 MHz, Bulk Pack of 10

Store/Ferrite Core Products/Mix 31/Snap On - Mix 31 - RFI Range 1-300 MHz

Product Details

MPN: FSB31-3/8

Initial Permeability (@ 10KHz): 1500

Material: MnZn

Max cable size - in/mm: .354/9.0

OD (A) - in/mm: .933/23

ID (B) - in/mm: .354/9

Length (C) - in/mm: 1.55/39.4

Z (ohms per bead - single turn 1 MHz): 18

Z (ohms per bead - single turn 5 MHz): 50

Z (ohms per bead - single turn 10 MHz): 81

Z (ohms per bead - single turn 25 MHz): 144

Z (ohms per bead - single turn 100 MHz): 240

Z ohms (per bead - single turn 250 MHz): 270

Ferrite Snap On, ID = .354 in/9mm, Mix 31, pack of 10 pieces for RG-8X, cables up to 3/8" OD

Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.

A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.

THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!