Use for DSL/cable modems, routers, access points, repeaters, Ethernet switches, etc.
The RFI-ROUTER-4 kit is meant to be used with a DSL Modem/Router with incoming DSL signal, up to 4 Ethernet lines and a single power DC power supply line coming into the device.Included are one snap on ferrite (3/4” hole) and two (3/4” hole) snap on split ferrite beads for the Ethernet outputs (2 per snap on using multiple turns for each cable). The additional 3/4" snap on is for the power supply line. The RFI-ROUTER-8 kit is identical but has 2 additional ferrite snap on for up to 4 additional ports,
Useful for all brands of computer equipment.Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Use for DSL/cable modems, routers, access points, repeaters, Ethernet switches, etc.
The RFI-ROUTER-4 kit is meant to be used with a DSL Modem/Router with incoming DSL signal, up to 4 Ethernet lines and a single power DC power supply line coming into the device.Included are one snap on ferrite (3/4” hole) and two (3/4” hole) snap on split ferrite beads for the Ethernet outputs (2 per snap on using multiple turns for each cable). The additional 3/4" snap on is for the power supply line. The RFI-ROUTER-8 kit is identical but has 2 additional ferrite snap on for up to 4 additional ports,
Useful for all brands of computer equipment.