Bothered by RFI/EMI from your aquarium pumps or heaters? If so use this filter on the AC power cord of each heater/pump to suppress the interference. Fits standard 120VAC AC plug
(2.4″ OD, 1.4″ ID hole), RFI Noise Suppression Range: 150 KHz-10 MHz, MIx 75
Excellent for standard 2 or 3 wire AC cables or multiple cables – use multiple cores in series for higher RFI suppression. Also useful when you need high turns count for high choking with large cable - works on all 120/240 and lower AC voltages.
Note: Wire shown for application purpose, NOT included with purchase.
If you want the AC chord with standardized AC plug, preassembled on the ferrite filter, see part# AC-CHOKE-6
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Bothered by RFI/EMI from your aquarium pumps or heaters? If so use this filter on the AC power cord of each heater/pump to suppress the interference. Fits standard 120VAC AC plug
(2.4″ OD, 1.4″ ID hole), RFI Noise Suppression Range: 150 KHz-10 MHz, MIx 75
Excellent for standard 2 or 3 wire AC cables or multiple cables – use multiple cores in series for higher RFI suppression. Also useful when you need high turns count for high choking with large cable - works on all 120/240 and lower AC voltages.
Note: Wire shown for application purpose, NOT included with purchase.
If you want the AC chord with standardized AC plug, preassembled on the ferrite filter, see part# AC-CHOKE-6