We have put together a generic kit of 5 large 2.4″ ferrite rings for AC/DC line cords and 8 easy-to-use snap on beads (1/2″ hole) specifically chosen to be effective for the most common devices effected by AM Broadcast and VLF RFI in the range of 150 KHz to 10 Mhz.
Effective suppression for interference to alarm systems, audio equipment, phone and ethernet cables, computers and control systems, and commercial and consumer electronic devices.
Complete with instruction manual with installation pictures. If you can screw in a light bulb and follow instructions, you should have no problem installing the chokes on your effected equipment.
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
We have put together a generic kit of 5 large 2.4″ ferrite rings for AC/DC line cords and 8 easy-to-use snap on beads (1/2″ hole) specifically chosen to be effective for the most common devices effected by AM Broadcast and VLF RFI in the range of 150 KHz to 10 Mhz.
Effective suppression for interference to alarm systems, audio equipment, phone and ethernet cables, computers and control systems, and commercial and consumer electronic devices.
Complete with instruction manual with installation pictures. If you can screw in a light bulb and follow instructions, you should have no problem installing the chokes on your effected equipment.