The RFI generator kit includes 2 snap on filters with 1 inch inside diameter for 1-2 turns of AC generator cable at generator and another 1-2 turns through center at the end of the generator cable near the powered device. The filter near the generator isolates generator power cable and prevents it from acting as an RFI antenna (generator source) and the filter near the powered device prevents the powered device from using the generator cable as an RFI antenna.

Use 2 or more turns through the filter for higher RFI suppression than a single turn (2 turns is 4 times the suppression as 1 turn, 3 turns is 9 times a single turn, etc.)

If you have a generator cable larger than 1/2" diameter, consider the RFI-GEN-3 generator filter with a 3" inside diameter.

Note: generator cable not included.