Tube Feed Line Chokes

Solar RFI/Noise Filter - 3/4" ID

SKU SNF-3/4
$19.50
Bulk pricing available for quantities of 20 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
20 items$17.5010% off
100 items$15.9518% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
Solar RFI/Noise Filter - 3/4" ID
Product Details
Material: MnZn
Max cable size - in/mm: .709/18
OD (A) - in/mm: 1.52/38.6
ID (B) - in/mm: .74/18.8
Length (C) - in/mm: 1.87/47.5
Z (ohms per bead - single turn 200 KHz): 30
Z (ohms per bead - single turn 500 KHz): 92
Z (ohms per bead - single turn 1 MHz): 130
Z (ohms per bead - single turn 2 MHz): 81
Z (ohms per bead - single turn 5 MHz): 66

Ferric snap on bead filter effective over frequency ranges specific to solar installations including PV solar arrays, inverters, optimizers, combiners and network related control devices.

Effectively suppresses Radio Frequency Interference under 300 MHz. Use for solar installations of AC, DC, data and Ethernet cables for reducing common mode currents creating interference in electronic devices.

THE RFI KIT FILTERS ONLY SUPPRESS COMMON MODE CURRENT (SIGNALS) THAT ARE COMMON TO ALL WIRES IN THE CABLE, AND DOES NOT EFFECT INDIVIDUAL DIFFERENTIAL SIGNALS ON EACH WIRE. THE FILTERS HAVE NO EFFECT ON THE NORMAL SIGNALS CARRIED WITHIN THE CABLE.

TUBE feed line chokes/Line Isolators are used to suppress common mode current carried on the outside of the  coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/4 wavelength intervals along the coax feed line and also at the entrance to the radio station.  They are available with various input and output connectors so as to conveniently connect to standard output connectors already installed on your feed line.

Palomar Engineers TUBE feed line chokes are designed to have 2-5 times more choking impedance over a broader frequency range than competitor units in similar packaging.  Each choke has the choking impedance and effective frequency range on the product label so you can choose the product best suited for your application.