Tube Feed Line Chokes

442300472 - Tube Feed Line Chokes
+10
+9
+8
+7
+6
+5
+4
+3
+2

FSB31-1-1, ID=1", RFI Range 1-300 MHz

Store/Ferrite Core Products/Mix 31/Snap On - Mix 31 - RFI Range 1-300 MHz
SKU FSB31-1-1
$19.95
Bulk pricing available for quantities of 2 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
2 items$17.9510% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
Pin it
FSB31-1-1, ID=1", RFI Range 1-300 MHz
Store/Ferrite Core Products/Mix 31/Snap On - Mix 31 - RFI Range 1-300 MHz
Product Details
MPN: FSB31-1
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: 1.0/25.4
OD (A) - in/mm: 2.22/56.4
ID (B) - in/mm: 1.02/25.9
Length (C) - in/mm: 1.69/41.9
Z (ohms per bead - single turn 1 MHz): 45
Z (ohms per bead - single turn 5 MHz): 90
Z (ohms per bead - single turn 10 MHz): 125
Z (ohms per bead - single turn 25 MHz): 218
Z (ohms per bead - single turn 100 MHz): 375
Z ohms (per bead - single turn 250 MHz): 340
Case/Box lot size: 36

Also known as Big Clamp On. Very useful for AC/DC power, coax cable, etc. Use multiple turns for best results or multiple chokes in series (recommended for large amperage power cables). Always put +/- dc cables through the same ferrite filter so their fields cancel and the ferrite suppresses the common mode current on each cable.

These ferrites also work well for coax feed line chokes. Use 3 turns of RG-213 size coax thru center and put several ferrite in series each with 3 turns to make an excellent 80-10 meter high power feed line choke.

Show More
Display prices in:USD
TUBE feed line chokes/Line Isolators are used to suppress common mode current carried on the outside of the  coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/4 wavelength intervals along the coax feed line and also at the entrance to the radio station.  They are available with various input and output connectors so as to conveniently connect to standard output connectors already installed on your feed line.

Palomar Engineers TUBE feed line chokes are designed to have 2-5 times more choking impedance over a broader frequency range than competitor units in similar packaging.  Each choke has the choking impedance and effective frequency range on the product label so you can choose the product best suited for your application.