These baluns and ununs can be used for impedance matching and also as End Fed halfwave antenna matching transformers to 50 or 75 ohm coax cable.
AC Cable Noise Filter for Standard 120VAC Plugs - 1.4" ID
Product Details
MPN: ACCF-3
Type: New
Country/Region of Manufacture: United States
RFI Range (MHz): 150 KHz to 10 MHz
ID-B (in/mm): 1.4/35.6
OD-A (in/mm): 2.4/61
Height-C (in/mm): 5/12.7
Weight (oz/gm): 106 grams
Initial permeability: 5000
(2.4″ OD, 1.4″ ID hole), RFI Noise Suppression Range: 150 KHz-10 MHz, MIx 75
Excellent for standard 2 or 3 wire AC cables or multiple cables – use multiple cores for higher choking. Also useful when you need high turns count for high choking with large cable - works on all 120/240 and lower AC voltages.
Note: Wire shown for application purpose, NOT included with purchase.
If you want the AC chord preassembled on the ferrite filter, see part# AC-CHOKE-6
