1.5:1 Baluns/Ununs

442300435 - 1.5:1 Baluns/Ununs
+3

Solar RFI/Noise Filter - 1/2" ID

SNF-1/2
$14.95
In stock
1
Product Details
Max cable size - in/mm: .5/12.7
OD (A) - in/mm: 1.14/29
ID (B) - in/mm: .514/13.1
Length (C) - in/mm: 1.14/29
Z (ohms per bead - single turn 200 KHz): 20
Z (ohms per bead - single turn 500 KHz): 58
Z (ohms per bead - single turn 1 MHz): 102
Z (ohms per bead - single turn 2 MHz): 70
Z (ohms per bead - single turn 5 MHz): 50

Ferric snap on bead filter effective over frequency ranges specific to solar installations including PV arrays, inverters, optimizers, combiners and network related control devices.

Effectively suppresses Radio Frequency Interference under 300 MHz. Use for solar installations of AC, DC, data and Ethernet cables for reducing common mode currents creating interference in electronic devices.

THE RFI KIT FILTERS ONLY SUPPRESS COMMON MODE CURRENT (SIGNALS) THAT ARE COMMON TO ALL WIRES IN THE CABLE, AND DOES NOT EFFECT INDIVIDUAL DIFFERENTIAL SIGNALS ON EACH WIRE. THE FILTERS HAVE NO EFFECT ON THE NORMAL SIGNALS CARRIED WITHIN THE CABLE.

Save this product for later
Display prices in: USD

50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.

50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output.  Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.