Use for 3/4″ Cable LDF-4, Heliax(R), LMR-600, etc.
Use five split beads for 80-10 meters (3-30 MHz) or ten split beads for 160-10 (1.8-30 MHz) meters or use 15 split beads for even higher choking for 1-10 MHz.
Typical Impedance per split bead: 10 MHz: 50 ohms, 25 MHz: 95 ohms, 100 MHz: 195 ohms, 250 MHz: 322 ohms
A minimum impedance of 500 ohms is needed for 50 ohm cable or 10 times the cable impedance for other cables.
The beads clamp to the cable and may be operated as is for indoor or outdoor use. For longer life outdoors to protect the plastic covers from weathering – use electrical tape for best results or heat shrink to ensure longer life. All kits come with instruction manual which covers assembly and application tips.
Excellent choke size for multi-turn RG-8X or similar size cables
Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.
50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.
50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output. Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.