1.5:1 Baluns/Ununs

1502429258 - 1.5:1 Baluns/Ununs
+3

SPE 1.3/1.5K-FA HF Linear Amplifier Deluxe RFI Kit - 17 Filters for RF In/Out, AC power, CAT/USB/ALC/PTT

RFI-LA-SPE1.5K-FA
$149.95
In stock
1
Product Details
MPN: RFI-LA-SPE1.5K-FA
Filter Power Rating (PEP watts): max coax cable rating
RFI Suppression Range (MHz): 1-100 MHz
# Ferrite Filters: 12
Typical Use:: AC/DC power, RF In/out, Control Lines

All coax I/O and control lines and AC/DC power line for SPE-1.3K-FA or SPE-1.5K-FA amplifiers with multiple RF inputs and outputs, control/keying/frequency I/O.

Included are the following chokes and installation guidelines to suppress RFI in and out:


RF Input (3x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center

RF Output (4x):Snap On Filter (1” ID) – 3 turns of coax cable through center

Relay Cable/ALC Cable (4x):Snap On Filter (1/2” ID) – multiple turns through center

CAT/USB (5x):Snap On Filter (1/2” ID)- multiple turns through filter for each ACC

AC Power:Snap On Filter (1” ID) – 3 turns of power cord through center

You get 1.4" ID Ring x 3, 1" ID snap on x 5, 1/2" ID snap on x 9 with each kit.

Save this product for later
Display prices in: USD

50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.

50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output.  Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.