1.5:1 Baluns/Ununs

1706155546 - 1.5:1 Baluns/Ununs
+3

Ferrite Snap On Sampler Pack, Mix 31, RFI Range 1-300 MHz - 10 filters (1/4, 1/2, 3/4, 1)

FSOSP-31-10
$59.95
In stock
1
Product Details
Brand: Palomar Engineers
UPC: Does not apply
MPN: FMSCP-31-10
Type: NEW
Country/Region of Manufacture: United States
: 10

The Ferrite Snap On Sampler Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 1″ for use as either single turn or multiple turn ferrite choke filters.

The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:

Mix 31 Ferrite Snap On Sampler (RFI Suppression range is 1-300 MHz)

FSB31-1/4 – 1/4″ ID – 3 pieces

FSB31-1/2 – 1/2″ ID – 3 pieces

FSB31-3/4 – 3/4″ ID – 3 pieces

FSB31-1 - 1" ID - 1 piece


Save this product for later
Display prices in: USD

50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.

50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output.  Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.