1.5:1 Baluns/Ununs

FT240-3I, ID=1.4", AC/DC/Coax Noise Filter, RFI Range 1-300 MHz, Case of 100

F240-31-100
$795.00
In stock
1
Product Details
MPN: F240-31
Country/Region of Manufacture: China
RFI Range (MHz): 1-300 Mhz
ID-B (in/mm): 1.4/35.6
OD-A (in/mm): 2.4/61
Height-C (in/mm): .5/12.7
Weight (oz/gm): 188 grams
Initial permeability: 1500
Case/Box lot size: 100
: 100
: 7.50

Case of 100 ferrite ring cores - Very useful for AC/DC power, coax cable common mode current suppression. For highest choking resistance, wrap cable through center of ring as many turns as possible. DO NOT use for impedance transformers (2:1, 4:1, 9:1, etc.) - use Mix 43 or Mix 61 for high power.

Save this product for later

50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.

50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output.  Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.