1.5:1 Baluns/Ununs

982840129 - 1.5:1 Baluns/Ununs
+3

DC Cable Noise Filter for Large Gauge Wire - 3" ID

DCCF-3
$39.95
In stock
1
Product Details
MPN: DCCF-3
Type: New
Country/Region of Manufacture: United States
RFI Range (MHz): 1-300 MHz
ID-B (in/mm): 3/76.2
OD-A (in/mm): 4/101.6
Height-C (in/mm): 1/25.4
Weight (oz/gm): 420 grams
Initial permeability: 1500

(4″ OD, 3″ ID hole), RFI Noise Suppression Range: 1-300 MHz

Excellent for large cables or multiple cables – use multiple cores for higher choking. Also useful when you need high turns count for high choking with large cable - works on large gauge DC power cables.

Note: put both positive and negative cables TOGETHER through the filter so that their differential currents cancel but their common mode currents are suppressed.

Save this product for later
Display prices in: USD

50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.

50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output.  Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.