Bullet EFLW Antenna Wire Kits (41, 71, 92, 111, 155, 173, 203, 268 feet) includes coated wire, insulator and connector lug - preassembled
Product Details
Brand: Palomar Engineers, Inc.
Country/Region of Manufacture: USA
Bullet End Fed Long Wire (EFLW) Antenna Wire Kit for end fed long wire antennas - choose 41, 71, 111, 155, 173, 203, 268 foot lengths complete with end insulator, #14 Insulated stranded copper wire and spade lugs and heat shrink for lugs for attachment to an optional Bullet 9:1 unun.
Insulators are a very stealthy, strong, pair of 2 PVC, 2 1/4" long. 1" wide. 1 1/8" hole separation wire antenna insulators and may be black, gray or white depending upon inventory
See related products for 9:1 transformers from 100 watts to 5KW, 9:1 toroid kits, and feed line chokes.
For a complete installation you will need 9:1 unun, wire kit, appropriate length of coax, and feed line choke (SOFLC is easiest to use and change position as you tune the antenna).
Bullet Antenna Length - feet (41, 71, 92, 111, 155, 173)
Corresponding Counterpoise length feet (16, 42, 90, 37, 95, 80) - place feed line choke on coax at this measured length from 9:1 unun
TECHNICAL NOTE: If you are building your own End fed Long Wire antenna, don't forget the end fed coax choke (or equivalent counterpoise) which is required to make the antenna operate correctly! End fed coax choke part numbers are SOFLC, EFFLC-240
On Sale
50:450 ohm (9:1) CUBE™ Unun, 1.8-61 MHz, 1.5 KW, End Fed Long Wire
50:450 ohm (9:1) CUBE™ Unun, 1.8-61 MHz, 1.5 KW, End Fed Long Wire
SKU CU-9-1500
List price $129.95
Save 15%
$109.95
50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.
50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output. Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.