Got an electronic interference problem on your boat or RV? Do you hear HUM-BUZZ-NOISE when you use the fish finder/radar/GPS/Generator or hear your voice on the stereo speakers when you transmit on the radio? Maybe you heard buzzing or humming when you turned on the battery charger/inverter/generator – any of these symptoms indicate you have RFI issues on your boat or RV and you need to stop it or the HUM-BUZZ-NOISE may drive you nuts!
But you don’t have to worry – We got the fix for you – lots of filters, all in a small box, that are easy to install on the wires of your electronic stuff that is bothered by the RFI.
If you have RFI, you need this kit:
|
Boat Owner’s Electronic Interference Suppression Kit Use this filter kit to suppress interference noise between electronic devices on your boat including: radar, fish finders, audio/video systems, inverter noise, solar controllers, vhf radio, marine/ham radio, auto pilots, electronic gauges, PA systems, and many other electronic devices. |
What is included:
A total of 17 Ferrite Ring/Snap-On Filters
Ring: 1.4” ID x 6, Snap on: 3/8” ID x 6, 1/2” ID x 5
Mix 31 Interference Range: 1-300 MHz
50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.
50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output. Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.