1.5:1 Baluns/Ununs

2654217920 - 1.5:1 Baluns/Ununs
+3

Aquarium AC Filter for Heater, Water/Oxygen Pump RFI

AACF-1.4
$12.95
In stock
1
Product Details
MPN: AACF-1.4
Type: New
Country/Region of Manufacture: United States
RFI Range (MHz): 150 KHz to 10 MHz
ID-B (in/mm): 1.4/35.6
OD-A (in/mm): 2.4/61
Height-C (in/mm): 5/12.7
Weight (oz/gm): 106 grams
Initial permeability: 5000

Bothered by RFI/EMI from your aquarium pumps or heaters? If so use this filter on the AC power cord of each heater/pump to suppress the interference. Fits standard 120VAC AC plug

(2.4″ OD, 1.4″ ID hole), RFI Noise Suppression Range: 150 KHz-10 MHz, MIx 75

Excellent for standard 2 or 3 wire AC cables or multiple cables – use multiple cores in series for higher RFI suppression. Also useful when you need high turns count for high choking with large cable - works on all 120/240 and lower AC voltages.

Note: Wire shown for application purpose, NOT included with purchase.

If you want the AC chord with standardized AC plug, preassembled on the ferrite filter, see part# AC-CHOKE-6

Save this product for later
Display prices in: USD

50 ohm coax to 75 ohm balanced output baluns are useful for low (< 1 wavelength) dipoles exhibiting 75 ohm characteristic impedance or for matching to balanced ladder line whose endpoint impedance is near 75 ohms.

50 ohm coax to 75 ohm CATV coax connections are easily done with a 1.5:1 unun with SO-239 connectors on input and output.  Likewise 50 ohm coax to unbalanced verticals or loads near 75 ohms can be matched with a 1.5:1 unun.