16:1 Baluns/Ununs

1502441265 - 16:1 Baluns/Ununs
+3

SPE 2K-FA HF Linear Amplifier Deluxe RFI Kit - 19 Filters for RF In/Out, AC power, CAT/USB/ALC/PTT

RFI-LA-SPE2K-FA
$184.95
In stock
1
Product Details
MPN: RFI-LA-SPE2K-FA
Filter Power Rating (PEP watts): max coax cable rating
RFI Suppression Range (MHz): 1-100 MHz
# Ferrite Filters: 12
Typical Use:: AC/DC power, RF In/out, Control Lines

All coax I/O and control lines and AC/DC power line for SPE-2K-FA amplifier with multiple RF inputs and outputs, control/keying/frequency I/O.

Included are the following chokes and installation guidelines to suppress RFI in and out:


RF Input (3x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center

RF Output (6x):Snap On Filter (1” ID) – 3 turns of coax cable through center

Relay Cable/ALC Cable (4x):Snap On Filter (1/2” ID) – multiple turns through center

CAT/USB (5x):Snap On Filter (1/2” ID)- multiple turns through filter for each ACC

AC Power:Snap On Filter (1” ID) – 3 turns of power cord through center

You get 1.4" ID Ring x 3, 1" ID snap on x 7, 1/2" ID snap on x 9 with each kit.

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.