16:1 Baluns/Ununs

RFI Solution Kits

Palomar Engineers provides a variety of Radio Frequency Interference (RFI) and Electro-Magnetic Interference (EMI) solutions from 100 KHz to 1000 MHz.

We have many RFI solution kits targeting common RFI problems encountered by consumers, broadcast professionals, radio operators, industrial plant managers, marine/ship operators, solar power contractors, etc. For custom individual RFI problems we offer individual ferrite RFI suppression components in bead, snap on and ring topology to fit various wire/cable configurations for AC/DC power cables, coaxial feed line, and device interconnect cables.

Different ferrite mixes suppress different frequency ranges. To select a mix for your interfering frequency see: Choosing a Ferrite Mix

To learn about using ferrites for RFI/EMI suppression check out : RFI Tutorial Center

Get a Copy of Ham Radio RFI Cheet Sheet for all your communication RFI issues!

If you need additional help call 760-747-3343 or email Sales@Palomar-Engineers.com describing your problem.

16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.