Name: MINI-BALUN 9:1, Top Studs output, 500 Watts PEP, 1-61 MHz
Brand: Palomar Engineers
SKU: MB-9-500TS
Price: 59.95 USD
Availability: InStock

MINI-BALUN 9:1, Top Studs output, 500 Watts PEP, 1-61 MHz

Store/Antenna Products/CUBE Impedance Transformers (<1:1, 1:1, >1:1)/50:200 ohm (4:1) Transformers

Product Details

Brand: Palomar Engineers

MPN: MB-9-500TS

Country/Region of Manufacture: United States

Effective Frequency Range (MHz): 1-60

PEP Power Rating (watts): 500 SSB (25% duty cycle), 250 Watts CW/FT8 (50% duty cycle)

Estimated Insertion Loss (db): .25 db

Input Connector Type: SO-239 female

Output Connector Connector Type: Dual 1/4" stainless steel studs

Enclosure Size (LxWxH inches): 3" long, 2 in wide, 1.25" high

9:1 MINI-BALUN Features:

- Uses proprietary Multi-Turn, Multi-Ferrite technology for maximum power transfer and minimum SWR

- 500 Watts PEP, 50 ohm SO-239 connectors In, Dual Stud Output, 1-61 MHz (usable to 100 MHz) - AKA 9:1 BALUN

- Works for coax fed antennas from 1.8-61 MHz (160-6 meters)

- 2-5 times more wider bandwidth and higher power then competing baluns of similar power ratings

This balun has a SO-239 input and 1/4" top studs output.

For Higher Power needs use our CB-9-1500TS or CB-9-5000TS

16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic, T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna. Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.