Garage Door Opener RFI Kit

539272641 - Garage Door Opener RFI Kit
+3

Smart Appliance RFI Kit - Washer, Dryer, Microwave, Refrigerator, Vacuum Cleaner, Clock or Lamp - 6 filters

RFI-KLA
$59.95
In stock
1
Product Details
MPN: RFI-HTS-SW
Type: NEW
Country/Region of Manufacture: USA
Filter Power Rating (PEP watts): not applicable
RFI Suppression Range (MHz): 1-300 MHz

This RFI kit is specifically designed to suppress interference triggered by today's smart appliances used in the kitchen and household that act as "transmitters" and affect other appliances or radio/TV/Cable audio systems OR these appliances may act as "receiver" of energy from other devices such as ham radio, CB, AM broadcast and other electronic devices in the home. The problem is generally the AC power cable acting as an "antenna" picking up or transmitting signals.

The RFI kit has ferrite filters are selected to eliminate RFI from 1 to 300 MHz and are typically used on the AC power lie of your Washer, Dryer, Microwave, Refrigerator and AC powered Clocks and Lamps. The filters are easy to install, don’t require modification of the protected equipment and work in almost all cases.

What is included in the kit?

The RFI kit contains 3 ring filters (1.4" ID), 1 large snap on (1" ID) and 2 smaller (1/2" ID) snap on filters for clock or lamps. Installation examples are shown in the included manual. Simple, easy to install and effective in almost all conditions.


Save this product for later
Display prices in: USD

Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise.  Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.

We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener.  Maximize the distance from the camera to the openers may also help.  Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.

Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.