Garage Door Opener RFI Kit

Generic Computer Equipment/Ethernet RFI Kit - 10 Filters

RFI-COMPUTER
$49.95
In stock
1
Product Details
MPN: RFI-COMPUTER
Type: New
Country/Region of Manufacture: United States
Filter Power Rating (PEP watts): n/a
RFI Suppression Range (MHz): 1-300 MHz
# Ferrite Filters: 10
Enclosure Size (inches): n/a
Typical Use:: 1-2 turns on all I/O cables

Generic Computer Equipment RFI Kits - use for desktop, laptop, DSL/cable modems, Ethernet, etc.

This RFI kit is specifically selected to cure most household computer device RFI problems. It contains 2 ferrite ring for AC or DC power supply protection and 8 Snap On ferrite 1/4" split beads selected to eliminate RFI from 1 to 300 MHz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.

Useful for all brands of computer equipment.
Save this product for later

Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise.  Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.

We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener.  Maximize the distance from the camera to the openers may also help.  Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.

Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.