Transceiver RFI Kits

 

Multi-Ring/Multi-Snap On Combo Pack, Mix 31, RFI Range 1-300 MHz - 17 filters

MRSCP-31-17
$95.00
In stock
1
Product Details
Brand: Palomar Engineers
UPC: Does not apply
MPN: MRSCP-31-17
Type: NEW
Country/Region of Manufacture: United States

This ferrrite Multi-Ring/Multi-Snap-On Combo Pack is a convenient solution for troubleshooting RFI/EMI (1-300 MHz) with various diameter cables ranging from 3/8" to 1.4"/35.6mm for use as either single turn or multiple turn RFI filters using ferrite rings and snap ons.

The filters are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on or ring with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turn). Included in these combo packs are our most popular snap on sizes as follows:

Combo Pack includes the following:

F240-31 ring – 1.4″/35.6mm ID – 6 pieces

FSB31-3/8 – 3/8″/9.5mm ID – 6 pieces

FSB31-1/2 – 1/2″/12.7mm ID – 5 pieces

Normal Retail price is $112 for these parts

Save this product for later

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.