MINI-BALUN 9:1, Top Studs output, 500 Watts PEP, 1-61 MHz
Product Details
Brand: Palomar Engineers
MPN: MB-9-500TS
Country/Region of Manufacture: United States
Effective Frequency Range (MHz): 1-60
PEP Power Rating (watts): 500 SSB (25% duty cycle), 250 Watts CW/FT8 (50% duty cycle)
Estimated Insertion Loss (db): .25 db
Input Connector Type: SO-239 female
Output Connector Connector Type: Dual 1/4" stainless steel studs
Enclosure Size (LxWxH inches): 3" long, 2 in wide, 1.25" high
9:1 MINI-BALUN Features:
- Uses proprietary Multi-Turn, Multi-Ferrite technology for maximum power transfer and minimum SWR
- 500 Watts PEP, 50 ohm SO-239 connectors In, Dual Stud Output, 1-61 MHz (usable to 100 MHz) - AKA 9:1 BALUN
- Works for coax fed antennas from 1.8-61 MHz (160-6 meters)
- 2-5 times more wider bandwidth and higher power then competing baluns of similar power ratings
This balun has a SO-239 input and 1/4" top studs output.
For Higher Power needs use our CB-9-1500TS or CB-9-5000TS
On Sale
RG-8X Coax Jumper Cable with PL-259's on each end - 3 feet
RG-8X Coax Jumper Cable with PL-259's on each end - 3 feet
SKU RG-8X-3
List price $19.95
Save 25%
$14.95
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.