Store

Resonance Compensator for 80 meters OCF, End Fed OCF Antennas - Broadband 80 meters SWR - 5KW PEP Rated

5.0
SKU RC-8040-3000
$49.95
1
Save this product for later
Customer reviews
Reviews only from verified customers
Reviews are only accepted from verified customers who have signed in and purchased the products. This ensures that each review is based on genuine customer experiences. All reviews are checked before publication to prevent spam.
Bob H.
Nicholson,
United States
Oct 14, 2025
Ordered this to improve the performance of my Palomar OCF dipole. WOW! What a difference. It flattened out the SWR across the bands and made vast improvements on the 75/80M band. The OCF dipole is amazing! I have heard more DX stattions with this antenna than I have heard in the past several years. Great produicts!
Show all 5 reviews
Share this product with your friends
Resonance Compensator for 80 meters OCF, End Fed OCF Antennas - Broadband 80 meters SWR - 5KW PEP Rated
Product Details

Off Center Antennas are often tuned below the fundamental band in order that the harmonic bands are resonant withing the band. E.G. it is not uncommon for an 80M OCF to be tuned for 3.45 MHz and this make the high end of 80/75 meters have a higher SWR sometimes over 3:1 making it difficult to use the built in tuners in most modern transceivers. The same condition may exist for 40M OCF antennas with resonance below 7 MHz.

The Resonance Compensator comes to the rescue! Just place it in the electrical center of the Palomar Engineers OCF antenna with its easy wingnut and washer installation (no soldering required) and start to enjoy 80 meter resonance near 3.75 MHz for 80 M OCF's while keeping other bands unchanged. If you are adding the RC-8040 to the existing Palomar Engineers 80M OCF, note you will change the length of both the short and the long leg of the antenna. See diagram included here of new dimensions. You may simply fold back thru the insulator any excess in each leg.

Tech Note: The RC-8040 has NOT BEEN TESTED on other brands of OCF antennas, many of which don't use hybrid baluns with internal chokes at the feed point. Consequently the coax braid is part of the antenna and it is very difficult to determine the placement of the RC-8040 because it may not be the physical center of the total wire length.

The RC-8040 also works with End Fed OCF antennas like our popular Bullet-8006 (Mark 1 version) or get the RC-8040 already integrated in the BULLET-8006RC end fed OCF or our PAL-OCF8006RC regular Off Center Fed dipole incorporating the RC-8040.

Product Installation Manual

Learn all about OCF Antennas in our FREE DOWNLOAD: OCF ANTENNA CONFIDENCE