Name: MINI-BALUN 9:1, Top Studs output, 500 Watts PEP, 1-61 MHz
Brand: Palomar Engineers
SKU: MB-9-500TS
Price: 59.95 USD
Availability: InStock

MINI-BALUN 9:1, Top Studs output, 500 Watts PEP, 1-61 MHz

Store/Antenna Products/CUBE Impedance Transformers (<1:1, 1:1, >1:1)/50:200 ohm (4:1) Transformers

Product Details

Brand: Palomar Engineers

MPN: MB-9-500TS

Country/Region of Manufacture: United States

Effective Frequency Range (MHz): 1-60

PEP Power Rating (watts): 500 SSB (25% duty cycle), 250 Watts CW/FT8 (50% duty cycle)

Estimated Insertion Loss (db): .25 db

Input Connector Type: SO-239 female

Output Connector Connector Type: Dual 1/4" stainless steel studs

Enclosure Size (LxWxH inches): 3" long, 2 in wide, 1.25" high

9:1 MINI-BALUN Features:

- Uses proprietary Multi-Turn, Multi-Ferrite technology for maximum power transfer and minimum SWR

- 500 Watts PEP, 50 ohm SO-239 connectors In, Dual Stud Output, 1-61 MHz (usable to 100 MHz) - AKA 9:1 BALUN

- Works for coax fed antennas from 1.8-61 MHz (160-6 meters)

- 2-5 times more wider bandwidth and higher power then competing baluns of similar power ratings

This balun has a SO-239 input and 1/4" top studs output.

For Higher Power needs use our CB-9-1500TS or CB-9-5000TS

TUBE feed line chokes/Line Isolators are used to suppress common mode current carried on the outside of the coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/4 wavelength intervals along the coax feed line and also at the entrance to the radio station. They are available with various input and output connectors so as to conveniently connect to standard output connectors already installed on your feed line.

Palomar Engineers TUBE feed line chokes are designed to have 2-5 times more choking impedance over a broader frequency range than competitor units in similar packaging. Each choke has the choking impedance and effective frequency range on the product label so you can choose the product best suited for your application.