Slip On Sleeve Chokes
Palomar 1:1 feed line choke kits are current baluns (split output) or ununs (coax output). They consist of several models with 5-15 large ferrite beads that slip over the coax (but will not slip over a connector). Also included are three lengths of shrink tubing to enclose the balun and hold the beads in place on the cable. They work from 1.8-300 MHz (see impedance table for each product for measured choking impedance levels for 5-15 beads) and allow use of full power rating of the coaxial cable at an SWR of 1:1. No tools are required for installation, just a source of heat to shrink the tubing using a heat gun, lighter, matches.
Refine by
On Sale
Slip On Coax Feed Line Choke - 1"/25.4mm cable, 1.8-300 MHz
Slip On Coax Feed Line Choke - 1"/25.4mm cable, 1.8-300 MHz
SKU BA-200-5
List price
$149.95
Save 27%
$109.95
On Sale
Slip On Feed Line Choke/Isolator - 1/4"/6mm coax cable, RG-58/LMR240, 1-100 MHz
Slip On Feed Line Choke/Isolator - 1/4"/6mm coax cable, RG-58/LMR240, 1-100 MHz
SKU SLO31-1/4-5
List price
$24.95
Save 28%
$17.95
On Sale
Slip On Feed Line Choke/Isolator - 1/4"/6mm coax cable, RG-58/LMR240, 1.8-300 MHz
Slip On Feed Line Choke/Isolator - 1/4"/6mm coax cable, RG-58/LMR240, 1.8-300 MHz
SKU BA-58-5
List price
$24.95
Save 32%
$16.95
On Sale
Slip On Feed Line Common Mode Line Isolator - 1/2"/12.7mm coax cable, 1.8-300 MHz
Slip On Feed Line Common Mode Line Isolator - 1/2"/12.7mm coax cable, 1.8-300 MHz
SKU BA-8-5
List price
$49.95
Save 60%
$19.95
On Sale
Slip On Feed Line Common Mode Line Isolator/Choke - 3/4"/19.5mm coax cable, 1.8-100 MHz, 5,10,15,20 bead option, Mix 31, LMR600
Slip On Feed Line Common Mode Line Isolator/Choke - 3/4"/19.5mm coax cable, 1.8-100 MHz, 5,10,15,20 bead option, Mix 31, LMR600
SKU SLO31-3/4-5
List price
$99.95
Save 30%
$69.95
These RFI kits are specifically selected to cure most household computer device RFI problems. It contains ferrite toroids for AC or DC power supply protection and Snap On ferrite spli beads selected to eliminate RFI from 1 to 1000 Mhz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.
Typical Installations